Chapter 1 Product Overview Head Cleaning when Clogged Nozzle Detected Set whether to run head cleaning automatically when the nozzle check determines that the nozzles are clogged. The factory default is “On” which runs head cleaning. How to Set Set using the operation panel of the printer, or using PrinterSetting. • On Print head cleaning is automatically run when nozzle clogging is detected. • On (Not During Printing) When nozzle clogging is detected during printing, print head cleaning is run automatically after printing. • Off Print head cleaning is not run even if nozzle clogging is detected. See "Operation Panel Settings" on page 223 or "PrinterSetting (Windows)" on page 185 .
Settings for Nozzle Check during Printing The following are settings for nozzle check during printing. • Nozzle Clog Detection • Detection Interval • Perform Nozzle Verification when Detected • Print Action when Detected Nozzle Clog Detection (Settings for Nozzle Check during Printing) Select whether to run a nozzle check during printing. The factory default is [Do not activate]. How to Set Set using the operation panel of the printer, or using PrinterSetting. • Perform for each specified number of sheets A nozzle check is performed every time the number of pages set in [Detection Interval] is reached.
[Detection Interval] can be set in the range of 1 to 25,000 pages in single-page increments. The factory default is “500”. • Do not activate Nozzle checks are not performed during printing. See "Operation Panel Settings" on page 223 or "PrinterSetting (Windows)" on page 185 . The number of sheets counted in [Detection Interval] is initialized when the set number of sheets is reached and a nozzle check is performed, or when the product is turned off. 31