Chapter6 Information for Application Development Replacing from ZPL II Compatible Monochrome Printer If you want to print from the printer using an existing application and printer driver that were used for a ZPL II compatible monochrome printer, you need to change the printer settings so that they match with the settings of the ZPL II compatible monochrome printer. Changing from Two-Step Printing to One-Step Printing CW-C8000 Series allow you to register an image file in png format to the printer, and print data sent from a host computer overlaying the registered image on the print data.
For example, if you had created color labels in two steps as described below, you can change it to one step without changing the system and data on the host computer. Step 1. Purchasing label paper preprinted in color from a printing company. Step 2. Printing monochrome data on the preprinted paper using ZPL II compatible monochrome printer. Conventional Printing Method (Preprinting + Monochrome Printer) Load preprinted paper Send monochrome print data Label paper preprinted in color by a printing company CW-C8000 Print CW-C8000 348