Appendix 4 Fix the leading edge of the paper to the winding core or insert it into the gap in the rotating shaft. O When using the winding core Align the side edge of the paper with that of the core, and secure the leading edge of the paper to the core with tape. Then, rotate the rewinder flange about 2 times to take up the slack in paper. Insert the winding core all the way to the base of the rotating shaft until there is no gap. CAUTION O When not using the winding core Insert the leading edge of the paper into the gap in the rotating shaft. Then, rotate the rotating shaft about 2 times to take up the slack in paper. 401