Overview of Screens How to display the screen (Standard mode) The following is just an example. The items available for setting vary depending on the indoor unit you are using. If there is no button operation for about 10 seconds, the screen returns to the home screen. Home screen User menu Select , then press . This screen is a menu for the user. See “Setting Screen List” for items which can be selected. Press Press and hold for 5 seconds. Administrator menu Information screen 5 30 ˚C 28 ˚C Press Select , then press . his screen is a menu r the administrator. ee “Setting Screen ist” for items which an be selected. ress and hold nd for 5 seconds.
Sensor view 12:34 30 ˚C 32 ˚C 1050PPM A3-01 (Unit 00) This screen displays the sensor values. If there are no sensors, a horizontal bar (“–”) is displayed. Choose which items are displayed by setting from the remote controller. This screen is not displayed by factory default. If it is not displayed, the icon view will be shown instead. Press / Icon view 12:34 A3-01 (Unit 00) This screen displays the time and the status of the remote controller and the system. If an error occurs, the error code is displayed.