Data East DX-1 — Data East DX-1 Multi Conversion Kit Installation Instructions Manual PDF

CARD There are two metal and placed in the RACK INSTALLATION brackets cardboard packaged box with with screws the interconnecting cables. These metal brackets are to be serewed to the sides of the card rack to provide a means of attaching the card rack to the side of a cabinet. Determine the most desirable rack and temporarily install of the enough peb's space location it. Try for the card removing one from the rack to determine was allowed for service at that a later date. Locate the power supply to the card rack cable assembly (cable H) and be certain that you have allowed for adequate slack in this cable when it is connected to the power supply.

NOTE IT IS IMPERATIVE THAT THE MAIN POWER LINE GROUND BE ATTACHED DIRECTLY TO THE GROUNDING BOLT ON THE CARD RACK (SEE PICTURE) BEFORE IT IS ROUTED TO OTHER PARTS OF THE SYSTEM. Figure 4,