Chapter 2 Setup Dip Switch Settings Use the dip switch to set the communication conditions and whether or not to perform self test when the power is turned on. Settings by connection patterns Set the dip switch for each connection pattern. 2 27 Connection Pattern Settings USB (Self Powered/Bus Powered) When using the followings, set the communication speed to 115200 bps. • EPSON OPOS ADK • EPSON OPOS ADK for .NET • EPSON JavaPOS ADK Serial (Stand-Alone) Match the serial communication settings for the computer and this product. Serial (Pass-through) Match the serial communication settings for the computer, printer and this product.
Serial (Y-type) Match the serial communication settings for the computer, printer and this product. Serial (USB controlled) Set the communication speed to 19200 bps. Serial (USB/Ethernet controlled) Set the communication speed to 19200 bps. TM Intelligent Printer (ePOS-Device) Match the serial communication settings for the TM intelligent printer’s EPSON TMNet WebConfig and this product. TM-DT Series (Windows) Match the serial communication settings for the TM-DT Series and this product.