Chapter 2 Setup DP-210 Checking the accessories Check the DP-210 parts. DP-210 Support Extension support 2 Extension power cable RS-232C connector installation screw (millimeter type) Setting the DP-210 Connector installation screw Inch-type hexagonal lock screws are installed in the connector for serial cable connection of DP-210. If millimeter-type lock screws are needed, use the millimeter-type lock screws of the accessory. Notch (one or more lines) inch-type millimeter-type Installation screw Jumper setting Set the jumpers as follows: 35 JP1 JP2 Description 1-2 1-2 For connecting both the TM printer and the DP-210. (Default setting) 2-3 2-3 Set this when using a standalone connection.