Chapter 2 Setup Attaching on the counter • The illustrations used here are for DM-D110, but you can still use them as your reference for DM-D210. • Because the illustration used here is for the RS-232/USB model, there are 2 cables. The USB model and RS-232 model have 1 cable. 1 Attach the affixing tapes on the back of the fixing plate A. (When using screws to attach it on the counter, you do not have to attach the affixing tapes.) 2 2 Pass the cable for this product through support C and attach support C to this product. When using support B for extension, insert the tab on support B into the hole on support C until you feel it click. When using support B for extension 64