Основные принципы работы Руководство по проектированию Дистанционное задание Система формирования задания для вычисления дистанционного задания показана на Рисунок 3.13 . 130BA244.11 3 3 Relative scaling ref. No function P 3-18 Analog ref. Pulse ref. Local bus ref. DigiPot Preset relative ref. P 3-14 (1) (0) Ref./feedback range P 3-00 Configuration mode P 1-00 (2) P 5-1x(19)/P 5-1x(20) P 3-10 Preset ref. (3) (4) Freeze ref./Freeze output Speed open/closed loop (5) P 5-1x(28)/P 5-1x(29) -max ref./ +max ref. Scale to RPM or Hz (6) (7) Input command: Catch up/ slow down 100% Y Relative X+X*Y /100 Catch up/ slow down -100% Torque P 16-01 ref.
Remote P 3-04 (0) X Scale to Nm No function D1 P 5-1x(15) Preset '1' External '0' (1) Catchup Slowdown value P 3-12 max ref. % Ref.resource 1 Analog ref. min ref. % Process Scale to process unit P 3-15 Local bus ref. Pulse ref. ±100% Freeze ref. & increase/ decrease ref. DigiPot Speed up/ speed down P 5-1x(21)/P 5-1x(22) Analog ref. No function P 16-02 P 3-16 Ref. resource 2 Pulse ref. 200% Ref. in % DigiPot Local bus ref. -200% No function Ref. resource 3 Analog ref. P 3-17 Local bus ref. Pulse ref. DigiPot Рисунок 3.13 Дистанционное задание 34 Danfoss A/S © Вер. 2014-04-04 Все права защищены. MG33BF50