Troubleshooting Your Computer Recovering and Reinstalling Software Recovering and Reinstalling Software The Recovery CD also provides Windows drivers specific to your computer to configure a custom system. You can find drivers in these locations: You can use the Recovery CD to recover the original software build for your computer. • On your computer’s hard drive under C:\hp\Drivers. • On the Recovery CD under \hp\Drivers. • On the HP Customer Care Web site (www.hp.com/go/support). This Web site contains the latest updates of software drivers for different operating systems.
To recover the factory installation of your hard disk Use the Recovery CD to reinstall the original factory software on your computer’s hard disk. You use the same process to create a larger Hibernate/diagnostics partition on your hard disk (Windows 95 or 98 only) or to create a Hibernate/diagnostics partition on a new hard disk. CAUTION This procedure formats the computer’s hard disk drive and erases all data on the disk. After the hard disk is formatted, you’ll need to reinstall your applications. Do not interrupt the following process or unplug the ac adapter until the process is complete. 1. Important. Back up all data from your hard disk.
The following steps delete all data from the disk. 2. Plug in the ac adapter. 3. Insert the Recovery CD in the CD-ROM drive. 4. Click Start, Shut Down, Restart. 5. When you see the HP logo, press ESC twice. 6. Select the CD or DVD drive as the boot device. Corporate Evaluator’s Guide 171