Making Connections Using Plug-In Modules Using Plug-In Modules You can use any compatible plug-in module with your computer’s module bay, such as: • CD-ROM or DVD drive. • Zip drive. • CD read/write drive. • Second hard drive. • Floppy disk drive. You can also attach the floppy disk drive to your computer’s parallel port using the external floppy drive cable. CAUTION Never remove a plug-in module without first notifying Windows—see “To replace a plug-in module” on page 55. Otherwise, you could lose data. • Secondary battery.
To install hot-swap support If your computer uses Windows 95 or 98, it also includes the Agatй Tioman “hot-swap” software that lets you disconnect most modules from the computer’s plug-in bay without needing to shut down and reboot the computer. If a plug-in module icon is displayed in the taskbar, Agatй Tioman is already installed. If the icon is not present, you can install the software as follows: • Click Start, Programs, Agatй Tioman for HP, Setup, then follow the onscreen instructions. 54 Corporate Evaluator’s Guide