Tire pressure monitoring system 4.3-17 Tire pressure learning (with tools) 1- Protection • Place protective pads at following locations: • Front fender; • Front bumper; • Driver’s seat; • Carpet (on driver's side); • Steering wheel; • Parking brake lever; • Shift lever. 2- Tool diagram • Tool No.: AX70902. 1. Up button 3. Down button 2. Confirm button 4. Delete button/Back button 3- Tire pressure sensor ID reading CAUTION • After the tire rotation, replace the tire pressure monitoring sensor, and do tire learning after the tire pressure monitoring control unit has been replaced. The tire pressure learning can be performed with tools if provided.
• Use the "OBD2 to DB9 data cable" to connect the tool to the vehicle OBD port. • In the main menu, select the Learn ID by pressing the Up and Down buttons and press the ENTER button to enter the Learn ID interface. CAUTION • The OBD2 data cable connector has 16 pins and the DB9 data cable connector has 9 pins.