ESC hydraulic control system 4.3-25 • Clamp the fixing brackets of the charging hole cover handle and the drive motor compartment handle in place and pre-tighten the fixing bolts (1). • Tighten the fixing bolts (1) of the charging hole cover handle and the drive motor compartment handle with a Phillips screwdriver. • Tighten fixing screws (1) of instrument panel left protective plate with a Phillips screwdriver. • Refit the fuse box cover in the passenger compartment. • Refit the instrument panel left protective plate (2). • Connect the battery negative cable. • Turn the ignition switch or the start-stop button on to check that the ESC OFF switch is working properly.