Indoor temperature sensor 4.3-33 • Connect the ventilation pipe (1). • Insert the indoor temperature sensor connector (2) and ensure it is clamped in place. • Refit the instrument panel left protective plate (3). • Clamp the fixing brackets of the charging hole cover handle and the drive motor compartment handle in place and pre-tighten the fixing bolts (1). • Tighten the fixing bolts (1) of the charging hole cover handle and the drive motor compartment handle with a Phillips screwdriver. • Tighten fixing screws (1) of instrument panel left protective plate with a Phillips screwdriver. • Refit the fuse box cover in the passenger compartment.
• Refit the instrument panel left protective plate (2). • Connect the battery negative cable.