Mitsubishi — 3.8.8.7 Moving Sign

Chapter 3 Creating and Editing Screens 3.8.8.6 Prestored Message 3.8.8.7 Moving Sign Revision May, 2010 3-143 Property Description of Prestored Message Element Display the state content of PLC corresponding contact or register directly. The user can set state number and text for each state. Read Address The address can be internal memory or the controller address.

(Please refer to Table 3-8-2 Property Description of General Buttons.) Text Text Size Font Text Color The user can set the text, text size, font and text color provided by Windows® to determine the text display on the element (Please refer to Table 3-8-2 Property Description of General Buttons.) Border Color Background Color (Please refer to Table 3.8.2 Property Description of Numeric Display Element.) Style (Please refer to Table 3.8.2 Property Description of Numeric Display Element.) Data Length Bit It can have two states. Word It can have 256 states. LSB It can have 16 states.

Data Format It provides BCD, Signed Decimal, Unsigned Decimal and Hex four kinds of data format to define the read memory content. Add/Remove State It is used to set the state numbers of prestored message element. If the data length of the value is in Word, 1~256 states can be set. If the data length of the value is in LSB, 16 states can be set. If the data length of the value is in Bit, only 2 states can be set.

X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Moving Sign Element Moving sign is a sign that uses movement, lighting, or special display to depict and display the state content of the corresponding contact or register. The user can determine the display of the moving sign by the settings of the direction, moving points, and interval (ms) in the property table. Read Address The address can be internal memory or the controller address. (Please refer to Table 3-8-2 Property Description of General Buttons.)