Mitsubishi — 3.8.9.6 Real Image

Chapter 3 Creating and Editing Screens Revision May, 2010 3-155 Property Description of Real Image Element Example (6) int hmAbortAction(); (7) int hmClose(); 4. Brief Explanation of the commands (1) Command: int hmOpen(const COMM_INFO* pCommInfo); Input Value: COMM_INFO structure Return Value: 1: Succeeded , 0: Failed Explanation: Enable HMI communication. Input the name of COM Port, such as COM1, COM2 etc. (2) Command: int SendImageFromFile(LPCTSTR szFileName); Input Value: File name of the image Return Value: 1: Succeeded , 0: Failed Explanation:

After converting the input image format into the width and height of the element, and Bit value, the system will start to transmit the image to HMI. This command is a synchronous command. After the data transmission to HMI is completed, this command will return. (3) Command: HANDLE hmAsyncSendImageFromFile(LPCTSTR szFileName); Input Value: File name of the image Return Value: 0: Failed, none zero value: Thread Handle Explanation: After converting the input image format into the width and height of the element, and Bit value, the system will start to transmit the image to HMI. This command is an asynchronous command. The user can perform relevant operation by using Thread Handle data.

(4) Command: int hmSendImage(HBITMAP hbmp); Input Value: HBITMAP Handle in Window Return Value: 1: Succeeded , 0: Failed Explanation: After converting the input image format into the width and height of the element, and Bit value, the system will start to transmit the image to HMI. This command is a synchronous command. After the data transmission to HMI is completed, this command will return. (5) Command: HANDLE hmAsyncSendImage(HBITMAP hbmp); Input Value: HBITMAP Handle in Window Return Value: 0: Failed, none zero value: Thread Handle