Mitsubishi — 3.8.10.1 Numeric Entry

Chapter 3 Creating and Editing Screens Revision May, 2010 3-159 Property Description of Numeric Entry Elements Setting Edit System Keypad Adjust the system keypad size Set the height of the title bar Set the font size Set the font Set the font color Set the background color Return to the default setting Minimum Maximum The user can set the minimum and maximum of input setting value to determine the range of input setting value. Integral Digits Fractional Digits Use this option to determine the digit number of integer and decimal fraction. The digit number is not a real digit number value. It is only the display format.

The digit number will be a real decimal number only when the data format is selected as “Floating”. When Variable Minimum/Maximum Value option is selected, it indicates that the minimum value is determined by Read Address+1 and the maximum value is determined by Read Address+2. Gain(a) Offset(b) Round off The user can use y = (a) x (read address value) + (b) this equation to determine the display numeric value (y). For example, if Gain value (a) is 2 and Offset value (b) is 3, when the read address value is 3, then the display numeric value will be equal to (2) x 3 + (3) = 9. If Gain and Offset value is a decimal, please set the data format as “Floating”.

If Round off option is selected, after the operation of the equation above, all numeric values can be rounded off and display on the screen. When the user have input the minimum and maximum value, after pressing OK button, HMI will examine the value by referring to the selected data length, data format, integral and fractional digits. Input Mode There are Touch Popup, Active Non-Popup and Touch Non-Popup three options. The default setting is Touch Popup. For the description of Active Non-Popup and Touch Non-Popup mode, please refer to section 3.8.14 Keypad Elements.