Mitsubishi — 3.8.10.2 Character Entry

Chapter 3 Creating and Editing Screens 3.8.10.2 Character Entry Revision May, 2010 3-161 Property Description of Numeric Entry Elements After Execute Macro If this option is set, when the user presses the button, the system will perform the operation of this button first and then execute the command of this macro. But, if the state of the button is not triggered by pressing the button (via macro or external signal), the command of this macro will not be executed. Info the overrange message When this option is set, an Error dialog box will appear to prompt the user the input value has exceeded the limit of the range setting.

Invisible Address When this option is set to On, this button element will be invisible. X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height Property Description of Character Entry Elements The user can set write and read address to input the data of the specific address by text or character and display them on the screen. The input and display text or character must be in ASCII format. Write and read address can be the same or different. (The max. string length is 28words.) Write Address Read Address The address can be internal memory or the controller address.

(Please refer to Table 3-8-2 Property Description of General Buttons.) Text Size Text Color The user can set the text size and text color that provided by HMI to determine the text display on the element. HMI provides 8~64 kinds of default text font for the user to use. Border Color Background Color Border Color option can be set only when the style of the character entry element is selected as Raised and Sunken. The style of the element below is selected as “Raised”. Its background color is set to blue and its border color is set to gray.

(If the style of the element is set to Transparent, the Border Color and Background Color these two options are disabled.) Style Standard Raised Sunken Transparent