Mitsubishi — 3.8.11.1 Trend Graph

Chapter 3 Creating and Editing Screens 3.8.11 Curve Elements Fig. 3-8-28 Curve Elements 3.8.11.1 Trend Graph 3-168 Revision May, 2010 Property Description of Trend Graph Elements The first step for setting trend graph is to set the curve number in “Curve Field Total” option (range is 1~4) in property table. Then, setting the read address, read format, curve width and color in “Detail Setup” option to complete the setup. The trend graph will continuously read numbers of addresses from the read address set by the user, convert the read data into trend graph and display on HMI screen. The numbers of the addresses is determined by the setting of “Sample Number”.

This function is used to read the values of the internal memory addresses and display on HMI screen statically. After setting, the user needs to set the specific address of the control block to trigger the drawing and clear operation of the trend graph. For the settings of the control block, please refer to Chapter 5. Border Color Background Color Border Color option can be set only when the style of the trend graph element is selected as Raised and Sunken. The style of the element below is selected as “Raised”. Its background color is set to black and its border color is set to gray. Style Standard Raised Sunken Curve Field Total 1~4 curves can be set and displayed.