Mitsubishi — 3.8.11.3 X-Y Distribution

Chapter 3 Creating and Editing Screens 3-176 Revision May, 2010 Property Description of X-Y Distrubution Elements Setting Control The address can be internal memory or the controller address. (Please refer to Table 3.2.2 Property Description of General Buttons.). The user can set the function is to sample or clear. When BIT 0 is turned ON (OFF→ON), it indicates that HMI will read the sampling points. When BIT 1 is turned ON (OFF→ON), it indicates that HMI will clear the sampling points. Auto Clear When this option is selected, HMI will disable the control address (ON→OFF) after reading the sampling points.

Continuous Address When this option is selected, the system will regard read address X as the starting address and designate the consecutive read addresses from read address X automatically. Doing this can save the communication time of the controller. For example, when read address X is set to 1@D301, if this option is selected, HMI will take 1@D302 as read address Y, 1@D303 as color address, 1@D304 as conjunction address. If this option is not selected, they can be specified to other kinds of addresses. Read Address X The address can be internal memory or the controller address.

(Please refer to Table 3.2.2 Property Description of General Buttons.) When the data is read, it will be converted to X distribution points and display on the screen. Read Address Y The address can be internal memory or the controller address. (Please refer to Table 3.2.2 Property Description of General Buttons.) When the data is read, it will be converted to Y distribution points and display on the screen. Color Used to determine the color of the sampling points (distribution points). It can be an internal memory, PLC address or constant. The range is from 0~65535.