Preface Thank you very much for purchasing DELTA’s DOP-B Series Human Machine Interface (hereinafter “HMI” ) products. This manual will be helpful in the installation, operation and specifications of Delta HMI product and HMI Screen Editor software program. Before using the product, please read this user manual to ensure correct use. You should thoroughly understand all safety precautions (DANGERS, WARNINGS and STOPS) before proceeding with the installation, wiring and operation. If you do not understand please contact your local Delta sales representative. Place this user manual in a safe location for future reference.
Using This Manual Contents of this manual This manual is a user guide that provides the information on how to install Who should use this manual and operate Delta HMI products and Screen Editor software program. This user manual is intended for the following users: Those who are responsible for designing. Those who are responsible for installing or wiring. Those who are responsible for operating or programming. Important precautions Before using the product, please read this user manual thoroughly to ensure correct use and store this manual in a safe and handy place for quick reference whenever necessary. Besides, please observe the following precautions:
Install the product in a clean and dry location free from corrosive and inflammable gases or liquids. Ensure that HMI is correctly connected to a ground. The grounding method must comply with the electrical standard of the country. Do not modify or remove wiring when power is applied to HMI. Before starting the operation, make sure the emergency stop equipment can be energized and work at any time. Do not touch the power supply during operation. Otherwise, it may cause electric shock. Revision May, 2010 i