Chapter 3 Creating and Editing Screens 3.8.13.3 Alarm Frequency Table 3-188 Revision May, 2010 Property Description of Alarm Frequency Table Elements HMI will monitor and read the read address in a fixed time automatically. If some certain Bit contact of the address is ON or OFF, the ON or OFF frequency of the contact will be converted to Alarm Frequency Table element and display on the screen. Background Color The background color of the following two elements is set to white and yellow respectively. The background color is set to white. The background color is set to yellow. Setting Time Format Provide HH:MM:SS, HH:MM two kinds of formats.
Date Format Provide MM/DD/YY, DD/MM/YY and DD.MM.YY three kinds of formats. Alarm Number If this option is selected, when the alarm occurs, the time and date when the alarm occurred will also be shown in front of the alarm message. Please refer to the figure below: Display for Counting Zero Use this option to decide if show the message on the Alarm Frequency Table element or not when the occurring times of the alarm message is zero. Color When Time and Date these two options are selected, the user can designate the display color by using this option.