Mitsubishi — 3.8.15.7 Scale

Chapter 3 Creating and Editing Screens 3-202 Revision May, 2010 Property Description of Scale Drawing Element Setting Data Format There are following data format provided: Word/Double Word 1. BCD 2. Signed Decimal 3. Unsigned Decimal Minimum Maximum The user can set the minimum and maximum of input setting value to determine the range of input setting value. Integral Digits Fractional Digits Use this option to determine the digit number of integer and decimal fraction. The digit number is not a real digit number value. It is only the display format. The digit number will be a real decimal number only when the data format is selected as “Floating”.

When the user have input the minimum and maximum value, after pressing OK button, HMI will examine the value by referring to the selected data length, data format, integral and fractional digits. SubScale Number When the main scale number is set to 3 and the subscale number is also used, the scale graphic element will display as the figures below: When subscale number is set to 1 When main scale number is set to 2 X Used to set X coordinate Y Used to set Y coordinate Width Used to set the element width Height Used to set the element height