Chapter 3 Creating and Editing Screens Fig, 3-10-11 On Line / Off Line Simulation Screen 3.10.8 Off Line Simulation To test the editing screen, the read/write addresses and the macro command to see if they are correct, the user can run an off-line simulation. To enable the off line simulation, select Tools > Off Line Simulation or click icon directly or press Ctrl + F5 (Fig. 3-10-11). 3.10.9 Upgrade Firmware This option is for upgrading HMI firmware or adding function for HMI. Keeping HMI firmware version to be the most updated version can optimize HMI operation. Ensure that the software version of ScrEdit matches the firmware version.
The user can get the firmware information by clicking Tools > Get Firmware Information (Fig. 3-10-12). Regarding the software version of ScrEdit, the user can find it by clicking Help > Help (Fig. 3-10-13). For the screen of upgrading the firmware please refer to Fig. 3-10-14. Revision May, 2010 3-223