Mitsubishi — 3.11.1 Configuration

Chapter 3 Creating and Editing Screens 3-234 Revision May, 2010 Default tab in Configuration option Element Default Value Blink Time Specify the default element blink rate when creating an element. The range is between 00 ~ 5000ms。 Scroll Size (if element has Scroll Size) (Customer will enter text here) This option is available for the element that has scroll function, e.g. Alarm History Table, etc. There are 20 pixels, 30 pixels and 40 pixels three options. The default setting is 20 pixels. Other tab in Configuration option General Setting Enable touch cursor When this option is enabled, the HMI mouse function is activated.

When touching HMI screen, a mouse will display on the screen for the user to use. It will display initial screen at start When this option is enabled, the default startup screen will display when HMI is powered on and started up. Blue Led mode This option determines when the blue LED indicator will be lit. There are three options: none (not be lit), COM (during communication), Access data (when accessing data) and Ethernet (communicating via Etherent).