Chapter 3 Creating and Editing Screens 3-268 Revision May, 2010 Environment Dialog Box Options Auto open last file when starting ScrEditor When this option is selected, HMI will automatically open the last saved file every time when the user starts HMI. Center Drawing Area When this option is selected, the editing screen will be placed in the center position. Include picture data for uploading If this option is selected, all pictures are also uploaded when the HMI upload function is enabled. All uploaded pictures are saved in a file named as _LocalTemp01.pib.
The “Picture Bank Name” and the “Picture Name” (set in Property docking window) of the editing elements will refer to and link to this file. If HMI ends the editing abnormally, the file name will be named as _LocalTemp02.pib, _LocalTemp03.pib …, and vise versa when uploading is executed the next time. The last two numbers at the end of the file name will increase progressively. Auto convert input address to tag name For example, if the user wants to replace PLC address 1@Y0 with the word “OS”, define it in Tag Table option in advance.
When this option is selected, HMI will automatically convert input address 1@Y0 to the word “OS”.。 Auto reboot after firmware upgrading When this option is selected, HMI will automatically restart (power off and then on) after the firmware upgrading is completed. Driver Reinstall HMI USB Drive: Press it to reinstall the HMI USB driver Uninstall HMI USB Drive: Press it to uninstall the HMI USB driver OK Press OK button to save the modified settings and exit the Environment dialog box. Cancel Press Cancel button to exit the Environment dialog box without saving.