Mitsubishi — 3.14.1.2 Off Macro

Chapter 3 Creating and Editing Screens 3.14.1.2 Off Macro This macro is attached to a button element. The user can use Off Macro for each specific button (Bit). Same as ON Macro, Off Macro is started via setting this button. When the button is set to be OFF, Off macro will be executed ONCE. After execution, this macro will not be executed until the button is set to be OFF again. However, OFF Macro only can be executed when the corresponding Bit for the button is triggered to be OFF through the action of pressing the button, i.e. the Bit is set to be OFF and the pressed button is OFF also. OFF Macro will not be executed if the Bit is set to be OFF only.

If there is a Monmentary button created on the screen and On Macro is used, when the button is pressed, the procedure is as follows: When the button is pressed (Set to be ON) When the button is pressed (Set to be OFF) Set to be OFF again Revision May, 2010 3-279 Monmentary Button pressed ) Monmentary Button is ON pressed F) Monmentary Button is OFF Execute OFF Macro