Chapter 3 Creating and Editing Screens 3.14.1.4 After Execute Macro This macro is attached to a button element or numeric / character entry element. One element has one After Execute Macro. The operation is that when the button element is pressed, the sysem will execute the command of this macro first and then perform the operation of this button. But, if the state of the button is not triggered by pressing the button (via macro or external signal), the command of this macro will not be executed. If there is a Monmentary button or numeric entry element created on the screen and Before Execute Macro is used, when the button is pressed, the procedure is as follows:
Set to be ON or Enter the value again Revision May, 2010 3-281 Monmentary button or numeric entry element hen the button is pressed Set to be ON) or when the alue of the numeric entry element is entered Monmentary button is ON or Numeric Entry Element is written Perform After Execute Macro hen the button is pressed Set to be OFF) or when the alue of the numeric entry element is entered Monmentary button is OFF or Numeric Entry Element is written Perform After Execute Macro