Mitsubishi — 3.14.1.7 Screen Cycle Macro

Chapter 3 Creating and Editing Screens 3.14.1.7 Screen Cycle Macro The user can use Screen Cycle Macro to cycle each screen. Each screen has a Screen Cycle Macro and it can be executed repeatedly for a specified period of cycle time. The user can set the Macro Cycle Delay Time, i.e. the delay time every time between the end and restart of Screen Cycle Macro in Screen Properties dialog box (See Fig. 3-14-2). The system default setting is 100ms. Fig.

3-14-2 Macro Cycle Delay Time Repeat Macro is executed Open a screen or switch to a new screen Revision May, 2010 3-283 Open the Screen (Execute Screen Open Macro) After Screen Open Macro is executed Execute Screen Cycle Macro After Screen Cycle Macro is executed Set cycle delay time to 100ms (This setting can be user-defined) Perform other ations on the screen Execute Screen Cycle Macro After Screen Cycle Macro is executed Set cycle delay time to 100ms (This setting can be user-defined) When the user wants to close or switch the screen Close the Screen (Execute Screen Close Macro) After Screen Close