Chapter 3 Creating and Editing Screens If DW shows after the macro command, it i cates that the command is 32 Bit data, if ndi D display, it indicates W doesn’t that the command is 16 Bit data. When the user set the format of the device as Double W ord, there will be two registers used actually. It means tha e user set the format o t if th f $0 as Double Word, $0 and $1 will be used for storing data. If Signed shows after the and is a macro command, it indicates that the comm n alue with polarity. If umeric v Signed doesn’t display, it indicates that it is a numeric value without polarity. For example, when the macro command is set to $0 = $2(DW), i.e.
make $2 a double w e Word memory ord, as Doubl will take two registers; it will assign register $2 and $3. P he shown as Fig. 3-14-33. macro command will be input in the editing window ress Update button and t Fig. 3-14-33 Input Macro Command After complete macro command editing, the user needs to perform Syntax Check and Update function to makes sure that the macro syntax is correct. For more details on Update and Syntax Chec k function, please refer to section 3.14.2.1. 3-298 Revision May, 2010