Mitsubishi — 3.14.3.3 Data Transfer

Chapter 3 Creating and Editing Screens  FILL (Fill the Memory) Equation FILL (Var1, Var2, Var3) Explanation FILL (Var1, Var2, Var3) means to fill address Var1 with data in address Var2 for a sequential V3 number of registers. Remark  The calculation result can be stored as unsigned or signed WORD.  If the block length is more than internal memory or max number of PLC register, there will be an error when compiling.  Var1 can be internal memory only. Var2 and Var3 can be internal memory or constant. Example Executing FILL command to fill $0, $1, $2, $3, $4 with constant 0 (this is an operation of unsigned 16-bit data).

 FILLASC (Convert Text to ASCII code) Equation FILLASC (Var1, “Var2”) Explanation FILLASC (Var1, “Var2”) means to convert text in address V2 to ASCII code and store in V1. Remark  The calculation result can be stored as unsigned WORD.  The max length is 128 words. 3-330 Revision May, 2010