Chapter 3 Creating and Editing Screens Remark The calculation result can be stored as unsigned WORD. Var1 and Var2 can be internal memory only. Var3 can be internal memory or constant. Example The starting address is for calculation $0, the data length is set to 2. After the communication, the calculated checksum through addition calculation is stored in $2 (this is an operation of unsigned 16-bit data). XORSUM (Use XOR to Calculate Checksum) Equation Var1 = XORSUM (Var2, Var3) Explanation This command uses XOR to calculate checksum. Var1 is the value after calculation, Var2 is the starting address for calculation and Var3 is data length.
Remark The calculation result can be stored as unsigned WORD. Var1 and Var2 can be internal memory only. Var3 can be internal memory or constant. Example The starting address is for calculation $0, the data length is set to 2. After the communication, the calculated checksum through XOR calculation is stored in $2 (this is an operation of unsigned 16-bit data). Revision May, 2010 3-357