Chapter 3 Creating and Editing Screens # (Comment) Equation # Statement Explanation This command is used to insert macro descriptions and make the macro readable. Using this command will not affect the macro function. The user only need to put # symbol in front of the equation and the macro will become readable. To change the comment to be back to the equation, just remove the # symbol. Remark Statement can be a string of texts or macro commands. Example When the comment is a string of macro commands: When the comment is a string of texts: Delay (System Delay) Equation Delay (Var1) Explanation This command is used to delay the user setting time by system.
Because DOP-B series HMI is a multiplexer system, a system delay may occur. Therefore, time set will be increased due to a System Busy condition and the condition that setting the time forward will not happen. Please note that too long delay time may result in slow response of HMI. The unit of delayed time is ms. Remark Var1 can be internal memory or constant. After Delay command is executed, HMI will stop the operation. The operation will resume after the delay time has elapsed (expired). Example Delay two seconds. Revision May, 2010 3-371