Mitsubishi — 3.14.3.10 Others

Chapter 3 Creating and Editing Screens  SETSYSTEMTIME (Set System Time) Equation SETSYSTEMTIME (VAR1) Explanation This command is used to set the system time. Var1 is the starting address of continuous 7Words in the internal memory address. Var1 represents Year Var1 + 1 represents Month Var1 + 2 represents Date Var1 + 3 represents Week Var1 + 4 represents Hour Var1 + 5 represents Minute Var1 + 6 represents Second Remark  Var1 can be internal memory or constant.  The input number should be a valid number or the system will not allow the user to set the system time.

For example, if a number of 8 is entered into the address of Var1+3 which represents Week, the system will determine the number of 8 is an invalid number and does not allow the user to change it. This is because the valid number for this address is from 1 to 7 (Monday to Sunday). Example The user’s screen will look like the figure shown as below. Suppose that now the system time is set to 2009/02/27 FRI 13:25:34. Revision May, 2010 3-373