Mitsubishi — 4.1 How to Create a 16bits Recipe Data

Chapter 4 Examples Click Options > Recipe , it can open Recipe Setup dialog box. Enable the recipe function and set the non-volatile area to HMI. In this example, the Length is set to 5, Group is set to 3 and Address is set to 1@D100. After pressing Input button, the user ’ s screen will look like the figure shown below. Then, press OK button to complete the Recipe settings. Next, click Options > Configuration , select Control Block tab. To control the read and write operation of recipes, in this example, Control Address is set to 1@D0 and the Length is set to 8. After complete the above settings, the user ’ s screen will look like the figure shown below. 4-2 Revision May, 2010