Chapter 3 Creating and Editing Screens Example 2: In Table 3-3-5, the size L is set to 3 and the number N is set to 2 with the recipe data. Thus the layout of the recipe data will be shown as Table 3-3-6, i.e. RCP0~RCP8 are occupied. When RCPNO is set to 2 and the recipe buffer area will show the 2 nd number of recipe data. RCPNO = 2 Recipe Buffer Area 2nd Number of Recipe Data Table 3-3-5 Recipe Table Table 3-3-6 Layout of Recipe Registers 32-bit Recipe Register The size of this register is 32bit (2 Words or Double Word, DW). If the data storage area is an external memory, i.e. a USB disk or SM card is connected, the data space of 32-bit recipe register is 50MB words.
If the data storage area is an internal memory, the data space of 32-bit recipe register depends on the specification of HMI flash memory. The user can refer to the specifications shown on DOP-B series catalogue. Please note that not only recipe data, there are also other screen data stored in flash memory. It indicates the total memory size of the recipe data space must be less than the space of the flash memory. For more details, please refer to HMI Memory dialog by clicking View > Memory List (Fig. 3-3-4). Fig. 3-3-4 HMI Memory Revision May, 2010 3-21 RCP0 12 RCP1 33 RCP2 76 RCP3 36 RCP4 42 RCP5 1 RCP6 12 RCP7 33 RCP8 76