Mitsubishi — 3.5.2 Open

Chapter 3 Creating and Editing Screens If other project files already exist and are open, the user will get the following dialog box to remind the user of saving project (Fig. 3-5-2) before creating new project. Press Yes button to save the existed file, press No button not to save the file and press Cancel button to cancel the save operation. After the user press the Yes or No button, the new project dialog box will appear again (Fig. 3-5-1). 圖 3-5-2 Saving dialog box Input project name, screen name, select HMI model and connecting base port controller (Fig. 3-5-3), and then press OK button. 圖 3-5-3 HMI model and base port controller options 3.5.2 Open Open Old Project.

Open current project by choosing File > Open (Fig. 3-5-4) or clicking the Open icon from toolbar, or pressing Ctrl + O . If other project files exist before opening an old project, the user will get the Saving dialog box (Fig. 3-5-2) to remind the user of saving file and then get the following dialog box for opening existing dop file (Fig. 3-5-4). If save operation is complete or there is no old project files, the following dialog box for opening existing dop file (Fig. 3-5-4) will show up directly. Revision May, 2010 3-43