Mitsubishi — 3.5.6 Make Ext. Memory Data

Chapter 3 Creating and Editing Screens 3.5.5 Save as Save current project to another file name by clicking File > Save As . The user will get Save as dialog box (Fig. 3-5-6) to input project name with extension file dpb . This dialog also appears automatically when the first time any project file is saved no matter whether Save As or Save command is used. Fig. 3-5-6 Save as dialog box 3.5.6 Make Ext. Memory Data Before using this command, ensure to compile the editing screen data. If not execute the compilation first, the ScrEdit cannot make screen data and an error message dialog box will show up (Fig. 3-5-7). Please execute the compilation first and then clicking F ile > Make Ext.

Memory Data to copy the compiled HMI program into SD card or a USB disk (Fig. 3-5-8). If the SD card or USB disk with compiled HMI program stored inside is inserted into HMI, HMI will startup by reading the data of SD card or USB disk directly. Fig. 3-5-7 Error message dialog box when making ext. memory data Revision May, 2010 3-45