Series HMI Connection Manual NOTE 1) This protocol only supports DF1 protocol mode. Setting can be done on with panel located on the top of PLC. Setting parameter: Advance Set DCOMM Cfg Enable Comms config set to DF1 default 2) This protocol supports BCC or CRC Error Check. 3) This protocol does not support Sring File and Long Word File, this request can be done by protocol SLC5. 4) F8 data is double word, used for Floating point. 10 V1.00 Revision March, 2010 Format Type Word No. (n) Read/Write Range Note File No. (f) Bit No.
(b) Control R6:n/DN R6:0/DN – R6:255/DN (f = 6, b = 13) R6:n/EM R6:0/EM – R6:255/EM (f = 6, b = 12) R6:n/ER R6:0/ER – R6:255/ER (f = 6, b = 11) R6:n/UL R6:0/UL – R6:255/UL (f = 6, b = 10) R6:n/IN R6:0/IN – R6:255/IN (f = 6, b = 9) R6:n/FD R6:0/FD – R6:255/FD (f = 6, b = 8) Control Size of Bit Array R6:n.LEN/b R6:0.LEN/0 – R6:255.LEN/15 (f = 6) Control Reserved R6:n.POS/b R6:0.POS/0 – R6:255.POS/15 (f = 6) Integer N7:n/b N7:0/0 – N7:255/15 (f = 7)