Downloaded from https://www.everyspec.com MIL-STD-2031(SH) 30.83 Flushover. Time to fhshover, if il occurs. Fkwhover is characterized by thermal flux levels equal to or greater thnn 2 watts per square centimeter at the floor level. 30.8.4 ‘1’emperature, Tlmc and temperature to maximum temperature recorded if flashover does not occur. 30.8.5 Observations. Visual observations such as smoke, fire in overhead, etc. 30.9 Large scale open environment fire test. 30.9.1 SoUree. Name and address of testing laboratory and date of test. 30.9.2 Nomenclature. Noun name, chemical name, manufacturer, and code designations. 30.93 Time-tempemture.
Time-temperature curve on the fire from the overhead thermocouple and from the thermocouple by the application outside the fire plume. 30.9.4 Failure time, Failure time, if it occurs, of the material application. 30.9.5 Fuel consumption. Fuel consumption during, the fire in gallons. Continued brim. The time that the material continues to bum after extinguishing the fire pan. 30.9.6 30.9.7 Visual inspection. Description of visual inspection of fire damage to the material application to include any swelting amtracticwt, cmeking, bulgin~ meltrng or dripping, seftertttibn of plies. 30.9.8 Extinguishment. Extinguishment extinguishment, reflash, and time to extinguish test data when conducted:
pre-bum time, time to reflash. 30.9.9 G- Combustion gas results for HCI in p/m, and any other gases collected. CO in p/m, C02, and 02 in percentage by volume, 30.9.10 Smoke obscuration. Smoke ohscuratinn data when collected. 30.9.11 Heat release. Total heat release by the material application when collected. 30.9.12 Observations. Additional observations, if any. 30.10 Large scale pressurizable fire test. 30.10.1 Source. Name and address of testing laboratory and date of test. 52