Downloaded from https://www.everyspec.com MIL-STD-3001-2A(AS) (1) Unless alternate identification is approved by the requiring activity, materials shall be listed by Government specification. (2) If the WP contains multilevel maintenance procedures and any of the materials are authorized for use at only certain level(s), the restriction shall be indicated by the use of an O, I, and/or D in parentheses following the item nomenclature. (3) When more than one of the same item is required, the quantity shall follow the nomenclature in parentheses. b. Parts that require mandatory replacement (e.g., preformed packing) in the procedure shall be listed. c.
An appropriate notation shall follow the item to explain each restriction and/or quantity requirement. 5.2.3 Required descriptive information, principles of operation, and operation data. Descriptive information, principles of operation, and operation data shall be developed and divided into WPs. Nomenclature used to identify aircraft weapon systems, aeronautical equipment, airborne weapons/equipment, and support equipment shall remain consistent throughout and between all WPs. 5.2.4 Description work packages. 5.2.4.1 Aircraft general description work packages ( General Aircraft Information and Plane Captain’s Manuals only ).
The descriptive WPs listed in 5.2.4.1.1 through 5.2.4.1.9 shall be developed for the aircraft weapon system, as applicable. All descriptive WPs may have an introduction intro >. 5.2.4.1.1 Aircraft general description work package . This WP shall contain the descriptive data requirements for the overall aircraft weapon system listed in 5.2.4.1.1.1 through 5.2.4.1.1.3 , as applicable. 5.2.4.1.1.1 Aircraft description acdesc >. A brief description of the aircraft and its mission capabilities shall be provided. A detailed definition of systems and subsystems shall not be included. 5.2.4.1.1.2 Aircraft dimensions acdim >.
Illustrations showing the external dimensions of the aircraft shall be provided. 5.2.4.1.1.3 Aircraft materials distribution acmats >. The types of material that comprise the aircraft airframe skins and doors shall be identified. Supporting illustrations shall be used to locate and differentiate the types of airframe materials. 6