Downloaded from https://www.everyspec.com MIL-STD-3001-2A(AS) 4.4.1 Use of the DTDs. The modular DTDs referenced in this Part interpret the technical content and structure for the functional requirements contained in this Part and are mandatory for use. 4.5 Technical content. Technical content requirements contained in this Part are considered mandatory and are intended for compliance. The content structure for the technical data being developed shall conform to the associated modular Document Type Definition (DTD) for Description, Principles of Operation, and Operation information. 4.5.1 Types of work packages. There are basically two types of WPs.
The first type is an information-oriented WP. It provides information such as general information about the printed TM or the IETM and specific information about the weapon system/equipment, such as principles of operation and operating instructions. The second type of WP is task-oriented. Task- oriented WPs reflect all required maintenance tasks, including testing and troubleshooting, at the assigned level of maintenance. Task-oriented WPs also contain supporting information such as required materials and support equipment required for each defined task.
WPs are written to reflect the engineering design, Logistics Support Analysis (LSA) or Logistics Management Information (LMI), Level of Repair Analysis (LORA), approved maintenance plan, and the established repair concept (i.e., Source, Maintenance, and Recoverability (SM&R) Codes). 4.5.2 Style and format requirements. For mandatory style and format requirements for WP TMs intended for a printed, page-oriented presentation, refer to MIL-STD-3001-1, Appendix B. For style and format requirements for the on-screen display of IETMs, refer to NAVAIRINST 4120.11, Policy for Preparation and Standardization of the Naval Air Systems Command Interactive Electronic Technical Manuals (IETMs).
4.6 Standard tables and lists. Standard tables and lists are noted throughout the text of this standard in bold and in parentheses (i.e., ( standard table ), ( standard list )). The structure and titles of the column headings for these standard tables and lists shall have no deviations. 5. DETAILED REQUIREMENTS 5.1 Preparation of descriptive information, principles of operation, and operation data. Descriptive information shall be developed for the overall aircraft weapon system and contained in a General Aircraft Information Module >.
Descriptive information, principles of operation, and operation data shall be developed for major aircraft systems, aeronautical equipment, airborne weapons/equipment, and support equipment and contained in a Description and Operation Information Module . Both information modules shall be logically subdivided into information- or task-oriented WPs. 5.2 Work package content. Each WP developed for descriptive information, principles of operation, and operation data shall consist of the following: a. Title block. 2