Downloaded from https://www.everyspec.com MIL-STD-3001-4(AS) . . Detailed parts for ASSEMBLY . . SUBASSEMBLY (ATTACHING PARTS) . . Attaching parts for SUBASSEMBLY ---*--- . . . Detailed parts for SUBASSEMBLY . . . SUB-SUBASSEMBLY (ATTACHING PARTS) . . . Attaching parts for SUB-SUBASSEMBLY ---*--- . . . . Detailed parts for SUB-SUBASSEMBLY b. Parts kits. (1) A statement indicating parts(s) availability shall be included after the description of the item or unit for which the kit is supplied. (2) The kit(s) part numbers shall be placed last in the list of parts of the unit to which it applies and at the same indentation as the unit to which it applies.
(3) Part kits shall be at the same indention as to the unit to which it applies. (4) Kit contents shall be at one indent below the kit description. (5) Lists of supplemental kits shall follow the list of original kits in the same manner as prescribed herein. c. Listing attaching parts. Attaching parts shall be listed beneath the item to be attached. They shall be listed, preceding any detailed parts of the item, at the same indention as the part they attach. The caption "(ATTACHING PARTS)" shall be placed one indention to the right of the nomenclature of the part to be attached, on the line immediately above the list of attaching parts.
The symbol "---*---" shall follow the attaching parts, to separate the list from subsequent listings of parts. The separation symbol shall have the same indention as "(ATTACHING PARTS)." (1) If common attaching parts are used for more than one item and each item is assigned a separate index number, the attaching parts heading shall be expanded to so indicate.
For example, if two clamps (one indexed -3, the other -4) are attached by one bolt, the correct attaching parts heading is "(ATTACHING PARTS FOR INDEX NUMBERS 3 AND 4)." (2) If the attaching parts are the same for a number of items and these items are indexed and listed separately one after the other, the attaching parts shall be listed following the last item, and the attaching parts heading shall be expanded to indicate this. For example, if six connectors, each having a different part number with the same attaching parts, are indexed -1 through -6, the correct attaching parts heading is "(ATTACHING PARTS FOR EACH OF INDEX NUMBERS 1 THRU 6)." d. Nomenclature consistency.
Nomenclature of identical systems, subsystems, equipment, support equipment, components, and parts of the end item shall be consistent throughout the GAPL and from work package to work package. The correct nomenclature shall be derived from one of the following sources (listed in the order of precedence): (1) "AN" nomenclature, 23