Downloaded from https://www.everyspec.com MIL-STD-3001-4(AS) Table 2. Inspection of Bushings FIGURE 1. Example of inspection procedures. 30 INSPECT MAX. SERVICEABLE LIMITS MAX. REPAIRABLE LIMITS CORRECTIVE ACTION 1. 1st stage bushings for: a. Wear (1) Wall thickness (2) Outside diameter 2. 2nd stage bushing for: a. Wear (1) Wall thickness 3. 3rd stage bushing for: a. Wear (1) Flange thickness (2) Wall thickness (3) Outer diameter (4) Bore diameter b. Damage (other than detailed in this table) 0.0555 in. min. thickness 0.622 in. min. dia. 0.056 in. min. thickness 0.050 in. min. thickness 0.055 in. min. thickness 0.499 in. min. Up to 0.389 in. dia.
Not serviceable Not repairable Not repairable Not repairable Not repairable Not repairable Not repairable Not repairable Not repairable Replace bushing Replace bushing Replace bushing Replace bushing Replace bushing Replace bushing Replace bushing Replace bushing