Downloaded from https://www.everyspec.com MIL-STD-3001-4(AS) Illustrated Parts Breakdown (IPB). For examples of typical technical content for specific work packages covered in this standard, refer to MIL-HDBK-3001. 4.5.1 Work packages. There are basically two types of work packages (WPs). The first type is an information-oriented work package. It provides support information such as principles of operation, general descriptive information, and controls and indicators descriptions for the weapon system/equipment.
Additional data that supports the procedural and maintenance tasks, such as lists of materials required, lists of support equipment, etc., are also considered information-oriented WPs. The second type of WP is task-oriented. Task-oriented WPs reflect all required maintenance or operation tasks at the assigned level of maintenance and environment, material, and support equipment required for each defined task. WPs shall reflect the maintenance concept developed from the Logistics Support Analysis (LSA) or Logistics Management Information (LMI), the Level of Repair Analysis (LORA), or the approved maintenance plan, and the established repair concept (SM&R codes).
4.5.2 Style and format requirements. For mandatory style and format requirements for WP technical manuals intended for a printed, page-oriented presentation, refer to MIL-STD-3001-1, Appendix B. For mandatory style and format requirements for the on-screen display of WP technical manuals, refer to MIL-STD-3001-1, Appendix C. For examples of typical technical content for specific work packages covered in this standard and nonmandatory style and format requirements, refer to MIL-HDBK-3001. 4.6 Standard tables and lists. Standard tables and lists are noted throughout the text of this standard in bold and in parentheses (i.e., (standard table) , (standard list) ).
The table and list head titles and structure of these standard tables and lists shall have no deviations. 4.7 Electrostatic discharge (ESD) sensitive equipment. If the electronic equipment to be handled, inspected, repaired, or assembled is ESD sensitive, the ESD icon and the symbol (ESD) shall be incorporated into the applicable tasks and procedures of the technical publications to ensure that ESD sensitive parts are not degraded during handling or operation. The ESD icon shall precede the procedure title.
The specific step(s) in the procedure addressing handling or operation which could damage ESD sensitive parts shall be labeled by placing the symbol (ESD) between the step number and the text. 4.8 Nuclear hardness.
If the weapon system/equipment to be operated, maintained or overhauled has nuclear survivability requirements (for example, overpressure and burst, thermal radiation, electromagnetic pulse (EMP), or transient radiation effects on electronics (TREE)), applicable warnings and Hardness-Critical Processes (HCP) symbols shall be incorporated into the applicable tasks and procedures of the technical publications to ensure the hardness of the equipment is not degraded during handling or operation. Caution shall be taken not to include classified information in an unclassified publication.
When entire paragraphs, including subparagraphs, are considered hardness critical, only major paragraphs shall be marked. The appropriate symbol (HCP), (HCI), (OCP), (OCI), (CSP), or (CSI) shall be placed between the paragraph number and title. When only certain processes/steps within a paragraph are hardness critical, only the applicable process/step shall be marked. The symbol (HCP), (HCI), (OCP), (OCI), (CSP), or (CSI) shall be placed between the step number and text. For the definitions of the acronyms contained in this paragraph, refer to section 3 of MIL-STD-3001-1. 4.9 Ozone depleting substances (ODS).
The continued use of ODS has been prohibited by Executive Order 12856 of 3 August 1993. The use of ODS materials in NAVAIR manuals is prohibited. A listing of these substances will be provided by the requiring activity. 4.10 Special processes. Information shall be included for any special process required under extreme environmental or operational conditions within the limits of the equipment. 2