US Army Materiel Command AMCP 706-250 — Engineering Design Handbook: Guns Series — Guns-General

Downloaded from https://www.everyspec.com is the term more often used in connection with small arms. The term barrel assembly may be used for all calibers to denote the tube and parts as- sembled thereto. This refers to the mechanism, in a gun using Ј cartridge cases, for pulling the empty cartridge case or an unfired cartridge out of the chamber. 1-10.5 Extracting Mechanism 1-10.2 Breech Closure A breech closure, as the term implies, is a general term denoting the closure of the breech end of a gun. This closure permits the hot propellant gases behind the projectile to act on it so as to impart the greatest possible kinetic energy for a given propellant charge.

A closure may be of the per- manent type or the mobile type. The latter type remains closed during the firing but may be opened aiterwards to permit reloading from the breech. Permanent closures are applicable only to muzzle loaders, such as mortars. Another type, known as the open-breech closure, is used for recoilless guns. Breech closures are discussed further and illustrated in Chapter 3. This refers to the mechanism, in a gun using cartridge cases, for automatically throwing out an empty cartridge case or an unfired cartridge from the breech or receiver.

1-10.6 Ejecting Mechanism 1-10.7 Breech Operating Mechanism This designates that part of the breech mecha- nism which must be operated to open or close the breech mechanism. This mechanism is discussed further in Chapter 3. 1-10.8 Loading Mechanism This term includes all mechanisms used for plac- ing the ammunition into the gun in position for firing. The process differs greatly, according to types and sizes of guns and ammunition. The term includes feeding mechanisms, ramming mechanisms and fuze-setting mechanisms when these are con- structed so as to become part of the loading or ramming operation. The subject is discussed fur- ther and illustrated in Chapter 3.

, The breech ring is a principal unit of gun con- struction, is attached to the gun tube at the breech end and supports the breech closure and other parts of the breech mechanism. In cannon termi- nology the term breech ring is commonly used, while the term receiver is more frequently used in relation to small arms and automatic weapons. The terms are discussed further in Chapter 3. 1-10.3 Breech Ring or Receiver 1-10.9 Muzzle Devices This is the mechanism which fires the primer to initiate propelling charge ignition. The principal types now in use are designated, according to the;, method of firing the primer, as percussion, electric, or combination percussion-electric.

The subject is discussed further and several types illustrated in Chapter 3. 1-10.4 Firing Mechanism Muzzle devices, also called muzzle attachments, are used in a number of forms and for a variety of purposes. Devices presently in common use include flash hiders (Fig. 5-2), flash suppressors (Fig. 5-3), blast deflectors, muzzle brakes and bore evacuators. A combination of the last three named devices is shown in Fig. 6-1 and a schematic diagram of the bore evacuator operation is shown in Fig. 6-2.