Downloaded from https://www.everyspec.com during both movements. Recoil operation is fur- ther classified as short recoil or long recoil accord- ing to the relative distance recoiled by the barrel. This classification comprises guns in which me- chanical or electric power is used to operate the breech mechanism through all or a portion of the loading, closing, firing, opening, and ejection cycle, the power being from a source other than the pro- pellant used to discharge the projectile. The prin- cipal use of external power in recent practice has been to attain rapidity of firing not possible with propellant powered operation.
By application of powered mechanism for feeding, fuze setting, ram- ming (chambering the ammunition), breech open- ing, etc., operation of the weapon may be as completely mechanized as the intended use may justify. In some uses, such as in tanks or aircraft, more efficient operation may be effected by appli- cation of external power to one or more phases of operation than by dependence on propellant- powered mechanism alone. 3-7.1 Externally Powered 3-7.3.1 Short Recoil This system is widely used in Army machine guns and semiautomatic pistols. In the machine gun application, the barrel, on firing, is permitted to recoil a short distance into the receiver.
In the first part of this movement the bolt remains locked to the barrel; in the latter part the bolt is unlocked, the barrel is stopped, and the bolt continues rear- ward with sufficient momentum to extract the fired cartridge case, withdraw a cartridge from the feed belt, cock the firing mechanism, and compress the driving spring, which returns the bolt forward to closed position.
As the bolt moves forward it actuates the belt feed lever to advance the feed belt, operates the extractor to align the cartridge previously withdrawn from the belt and eject the fired case, strikes the rear of the barrel to chamber the cartridge and lock itself thereto, then drives the barrel forward to firing position and releases the firing tube. Breech ring and breech mechanism recoil as a unit in sliding ways in the mount. An interposed recoil mechanism dissipates a portion of the energy of recoil, but stores a sufficient por- tion (by compression of a spring or confined gas) to return the recoiling unit to its starting (firing) position.
A camming device is so located in the stationary mount that, as the recoiled unit moves forward in counterrecoil, the cam engages the operating crank of the breech mechanism and ro- tates it to slide the breechblock to open position. This movement of the breechblock operates the extractor levers and cocking lever to remove the fired case, recock the firing mechanism, lock the breeehlock in open position, and store energy in the breechblock closing spring. The breech is thus left open for insertion of the next round.
This method, employed in automatic rifles, semi- automatic rifles, carbines and for unlocking 20mm automatic guns, consists of diversion of a minor quantity of propellant gas from the bore of the tube into a suitable small cylinder, where it drives a piston connected to ^ie breech mechanism to accomplish the desired operation. In the rifle and carbine this action unlocks the bolt and drives it rearward to withdraw and eject the fired case and compress a spring which returns the bolt to closed position. After the bolt reaches its rearmost posi- tion, the next cartridge is pushed into a position ahead of the bolt.
The bolt, when it moves forward, drives the cartridge into the chamber and rotates itself by cam action to lock the closure. The weapon is then ready to fire. 3-7.2 Gas Operation 3-7.3 Recoil Operation This method, employed in machine guns, semi- automatic pistols and shotguns and in the opening of sliding breechblock cannon, utilizes the recoil and counterrecoil movement of the gun, or parts thereof, relative to nonrecoiling parts, to operate the breech mechanism.
Interaction between the moving and stationary parts to produce the neces- sary motions is obtained either as the recoiling parts are moving rearward or while the recoiled parts are being restored to the forward position by springs or gas compressed during recoil, or In this system the barrel and the breechblock or bolt recoil the entire distance together. The bolt is then held open in the recoiled position as the barrel goes forward a sufficient length of time to permit extraction of the spent case and reloading. The rate of fire is necessarily slow and the method has little application to present military design. 3-7.3.2 Long Recoil 3—15