US Army Materiel Command AMCP 706-250 — Engineering Design Handbook: Guns Series — Guns-General

Downloaded from https://www.everyspec.com each link and the next; removal of the cartridge breaks the connection. To provide satisfactory air- craft use of guns designed for magazine feed, a disintegrating belt with lateral extraction of car- tridges is used with an attached feeding mecha- nism on some 20mm automatic guns. In this application the cartridges are fed downward by twin star wheels into the feed way in the top of the gun receiver. Prior to the entrance of the cartridge into the receiver, the link is separated from the cartridge by stationary fingers over which pro- jecting ears of the link ride as the cartridge is forced downward.

The pressure on the cartridge forces the open side of the loop to spring open sufficiently to release the cartridge, and the link is shunted into the rejection chute of the feeder. While links of disintegrating belts once used may be serviceable for a second feeding, they are gen- erally considered expendable, except for practice firing. 3-8.2.4 Hopper Feeding The use of a simple hopper to feed loose car- tridges into the gun feedway has not to date proved satisfactory for rapid-firing guns. Current weapons utilize some form of power feeding to obtain posi- tive action and maximum freedom from undesired interruptions. 3—27