US Army Materiel Command AMCP 706-250 — Engineering Design Handbook: Guns Series — Guns-General

6-2.14 Logistic Requirements Downloaded from https://www.everyspec.com in accordance with the purpose and conditions of use of the weapon. The need, for rapid mobility in modern tactics, and the high demands on national supply and transportation resources make it highly desirable to avoid unnecessary bulk and weight. Hence, the military requirements for proposed weapons nor- mally include not only the desired performance characteristics, but limitations on weight and over- all dimensions. These are particularly important where transportability by air is required.

The need for minimizing demands on transportation, produc- tion, and storage facilities also emphasizes the im- portance of designing for, high dependability and long service life, in order to minimize the need for replacement items and parts. 6-4 Reasons for New Weapons In military operations, as in production of com- modities for peaceful consumption, the effectiveness of manpower depends to a large extent on the mechanical aids used to increase, concentrate and apply that power.

Hence, it is essential, for effec- tiveness of the national defense, that new designs be continually developed for improvement in both weapon effectiveness and the relation between effec- tiveness and overall cost in man-hours of labor. Factors prompting new weapon design include the following: 6-2.15 Maintenance Requirements (1) The using services require a weapon hav- ing a new combination of characteristics to imple- ment new concepts or developments in tactical operations.

For high and continued effectiveness of the gun in field use, it is important that the operation, main- tenance, and servicing be as simple as possible, and not require highly skilled personnel, nor laborious and time-consuming procedures. Standard tools and equipment should be utilized as far as is prac- ticable, and any special equipment necessary should be as simple and compact as adequacy permits. Maintenance considerations are given more fully in Reference 13. (2) New developments in projectiles or in pro- pellants require new or modified gun designs for proper utilization.

(3) Appropriate improvements in attainable solutions in one or more of the problem areas indi- cated in paragraphs 6-2 through 6-2.15. These improvements may be realized from: (a) Extension of knowledge resulting from research and development programs. Fields of possible gain include:

new materials, alloys, or mixtures having favorable characteristics or be- havior; new developments in shaping processes, or in treatments of conventional materials to improve their behavior under conditions of gun usage; more accurate methods of evaluating the stresses and destructive factors produced in gun operation, and of reducing or counteracting their effects; and new or improved methods of detection of latent material defects, that may enable reduction in design safety factors without increase in the risk of failure of materiel accepted for service.

6-3 Balanced Solution Obviously, some of the factors and characteristics indicated above are in opposition to others, and achievement of one characteristic in the desired degree may require the sacrifice, in some degree, of other desired characteristics. For example, higher velocities (or shorter times of flight), de- sirable for antiaircraft and antitank guns, involve higher pressures and temperatures that not only necessitate stronger and heavier structures, but increase bore erosion to reduce the useful life of the weapon. Design of a gun requires adjustment between opposing factors.

Each new weapon should present a combination of satisfactory or acceptable solutions of a number of problems in the mandatory or preferential areas, achieved with the least possible incurrence of undesirable conditions in the opposing areas. The balance effected obvi- ously will depend on the relative importance as- signed to the various factors in the design project, (b) Ingenuity of designers. Designers may evolve new arrangements, mechanisms, or com- ponent details that present improvement in ease, speed, or safety of operation, effectiveness of re- liability of function, length of service life, elimina- tion of excess weight, or economy of production or maintenance.

(c) New manufacturing processes. New procedures or processes in the production of semi-