US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles

Downloaded from https://www.everyspec.com B. CRADLE BODY ( 1. Shear and Moment Chart Station x V X V H y M, M, M 59.35 0 171 171 0 0 0 0 0 55.00 4.35 345 516 -74 -74 52 6.35 -33 -107 53.&5 1.65 0 516 -85 -192 372 7.35 -273 -465 47.35 6.00 -71 445 0 0 -310 0 -775 21.65 25.70 -35 410 -1143 -1918 20 65 - 1 -1919 12 9.65 -39 371 0 0 -396 0 -2315 9 3.00 -650 -279 0 0 -111 0 -2426 2" 7.00 0 -279 195 -2231 44 6.65 29 -2202 0 2.00 0 -279 56 -2146 -1938 7.35 1420 -726 -5 5.00 -395 -674 139 -587 59 5.35 -;R -619 -8 3.00 76 -598 0 0 202 -417 -9 1.00 598 0 0 0 60 -357 -15 6.00 0 0 1389 2.65 368 +11 Units of x and y are given in inches; V, XV and H in 100 lb; M, M, and M in 1000 lb-in.

The maximum bending moment occurs nine inches in front of the trunnion. The moment of inertia is based on the dimension of the cradle cross section shown in Figure 31. 2. Stress and Deflection Dimension falls far below the stress that would yield a 18 x 11 198 5.5 1090 5995 1996 16 X 10 -160 6.0 -960 -5160 -1333 factor of safety of 1.5.

Howaver, rigidity is a 9 X 3 27 12.6 337.5 4,19 20 property of higher priority inasmuch as large 6 X 1 -6 12.5 -75 -938 - deflections eventually mean poor accuracy 2 59 392.5 3516 683 Thus, rather than decrease the section and in- crease its structural efficiency stress-wise, it is The moment of inertia at the base line (EL) betk' to maintain its rigidity to promote is better accuracy. 3oth structures, cradle and IBL = ZAd 2 + 2Io = 4200 in' gun tube, combine their stiffness although they - "Ad are treated as two parallel bee-ns with no hori- d = 6.65 in, distance from base line to zontal shear connection betwF-,, them. neutral axis 92. The bending stress of 10,200 lb/in 2 k A d.

Ad Ad I,) 93. The deflections are determined by the I =IBL - _A2 = 1590 in', moment of moment area method (refer to Figure 34). inertia of cradle section First, the deflection is determined for the structure at the breech end by computing the moment of the M 'EI area at this point, Mc 2,426,000 X 7.35 11:200 lb /in 2 , Station -15.0. This deflection is normal to 0' 1 1590 bendingstress the tangent of the elastic line at Station 59.35. In the above table Referring to %he Shear and Moment Chart of Dimension = base X height of parts of the Paragraph 91, the value of M I is computed section for each station and drawn to scale in Figure A - area of each part 34.

d = distance from base line to neu- I -1 , + Ir = 4600 in' tral anis of part 38